I've seen a lot of evil dead dioramas and I've been wanting to make one myself so this is how I did it. First I made the floor I took some cardboard and then I made the floor boards out of craft...[See More]

I had not done a 1:12 Ash yet and the second I saw the Pretty Boy figure I knew if I got one what I would use it for. It was just a matter of finding the right price for the set. So finally got one...[See More]

Bruce Campbell rocks wanted to make an Ash and got lucky went to Ross and found an toney terror Ash needed his head so I took his head and put it on one of those gi joe classified twins forgot which...[See More]

NECA Ash Evil Dead 1 base and swapping out bottom torso from an Evil Dead 2 Ash along with his boots to shoes. Then just painted him bloody. This was also a fast job....[See More]

Deadite Linda base was a NECA Carrie clean version. The head is from the NECA Evil Dead 2 set. The arms were from spare parts along with her hands. I'd seen other custom design from fans and they...[See More]

I used a neca Carrie White figure I resculpted with Bella arms and Evil dead 2 Linda servered head, I tried to make the dress as accurate as possible...[See More]

Used a Hood figure as the base, the main head was a cast, the other was a heavily sculpted Hood head to look more like Bruce Campbell. The chainsaw was a modified Dollhouse 1/12 chainsaw bought cheap...[See More]

I used legs and arms from marvel legends jessica jones, bella swan's torso, heroes nicky shoes, and 3 printed her head. I sculpted all the details from her top to her pants details and painted it...[See More]

Used the new 1981 Ash from Neca, repainted the whole body, changed the left lower leg to match the ending of the movie. I also repainted the heads to have them dirty and made new accessories, book,...[See More]

I used a stop value Ash I resculpted to give him his red jacket from the Baal episode,and also resculpted the sleeves and t shirt before painting him :) will probably add accessories later...[See More]

Cast my own hand. Cut old skateboard deck down, then used knife to cut grooves to make floor look like crude hardwood flooring. Attached hand with a few screws then drilled 2 holes in wrist area. Put...[See More]

Sam was one of my favorite things from evil dead regeneration sadly no figure of him was never made untill now. First I made the skeleton out of wire and then I made the body out of duct tape and...[See More]

I used sarah connor s body, Amanda ripley arms and mezco heroes head and boots, I sculpted the torso hair, accessories and details and painted it all...[See More]

This one was an easy making, I used the ultilate ED2 from neca, resculpted the shirt, belt, mouth and hair and repainted it all,then I sculpted all of the accessories, dagger s blade, book axe and...[See More]

So, I used a Laurie Strode body I heavily resculpted, Sarah Connor's boots,I zombie s hands and a handmade head :) Update:Jill Marie Jones reposted it on her instagram and this was the best thing...[See More]

Ink in blood and bound in human flesh well not really this how I made the Necronomicon I based it on the one from Evil Dead 2, I first took some cardboard cut it out to look like a book then I glue...[See More]

My custom creations from The Evil Dead. The Ash figures are basically the standard NECA Ash figure with a bit of sculpting and paint. Scotty started out as the Ed figure from the 2 pack. Cheryl and...[See More]

For this one, I used an old jacob from twilight head I fully resculpted, torso and arms from Tonto, cut and resculpted, t 1000 uper legs, ash lower legs and preacher shoes, Pablo s skull head was...[See More]

This was a commission for a new client. They wanted a 4 inch Ash with a lot of articulation. We discussed potential base figures and decided to go with boss fight. The shirt, harness, and lower pants...[See More]

Evil Dead 2 is one of my favorite horror movies. I was so psyched when Mezco released their Ash, but I was a little disappointed in the articulation, especially in the arms. I carefully stripped the...[See More]

After seeing the NECA evil dead 2 pack out of package I knew I needed somewhere to display them. I started out with a pink foam base then started a popsicle stick floor and walls to get natural wood...[See More]

I needed a stand for the Linda head accessory that came with NECA's Ash figure so I took a disney skeletal pirate and cut away all of the clothing then sculpted the rotting flesh in there....[See More]

I used a hero ash to recreate the finale episode damaged Ash, with used and dirty clothes, blood, dagger and some messed hair...[See More]

Hi! For this guy I used a stop value ash I resculpted the outfit of, from jacket to tie, t 1000 lower legs and shoes,and a severed battlestar galactica six head I also resculpted, and then I painted...[See More]

I took a NECA Asylum Ash, stripped off the straight jacket and sculpted the bomber jacket with epoxy putty. I then added some NECA Quentin Turnbull arms and sculpted over those. The legs had a thin...[See More]

I really hoped NECA would release this version of Ash, but sadly it looks like we will never get an official one. So... Not really that much went into this. I sculpted the straps onto the jacket with...[See More]

Trimmed the Value Stop jacket to shape, then bulked it out with green stuff before sculpting on the jacket. Same with the sleeves....[See More]

I used a Value Stop Ash, trimmed and sculpted over the red shirt. The puppet is sculpted from scratch. It has a magnetic neck using a metal ball to get some nice all round motion....[See More]

I used a heavily modified NECA Carrie for the body. Added NECA Alien 3 Ripley arms with Diamond Select iZombie Liv Moor zombie hands. The head is the accessory from the Ultimate Evil Dead II Ash. The...[See More]

Ash is here so shut up about it!! I never liked the original head, so was excited to see this AWESOME new head sculpt. 1. Base figure Neca hero Ash. 2. Neca Value Stop Ash vs Evil dead head. 3....[See More]