Rash (Battletoads) (Marvel Legends) Custom Action Figure
Custom #:99121
Name:Rash (Battletoads)
Custom Type:Action Figure
Toy Series:Marvel Legends
Creator:Customs by Matchu  
Date Added:December 19, 2018
Base Figure:Prowler
Height:6.00 inches
Critiques:Requested!
!!!OVER 70 HIGH QUALITY PICS ON MY WEBPAGE, GOOGLE CUSTOMSBYMATCHU!!!

What up everyone! Back again with a reveal that I have been wanting to share for a while now, but due to Secret Santa rules, I have had to hold off until it is officially revealed by the recipient. Well, the time has come for my Fwoosh Secret Santa entry for 2018, Rash from Battletoads.

Before we get started, I have to say that I have always wanted to make a custom Battletoad for one of these swaps. So you can imagine my excitement upon discovering Rash on my list, there was really no other option. Too bad , as there were some real gems on the list, but ya, non-negotiable. Rash was the only choice.

My mind immediately went to work, thinking of the perfect base body and how it would scale up with the other 2 toads. I opted to use a Prowler figure because I really like the build of that body (and if there was any paint rub, he is green in all the right spots). I figured, if my recipient decided to make Pimple and Zitz you could build them on the Sentry and Reaper bodies, and they would scale perfectly with Rash.

Aside from Prowler, I used a Nuke head as a base for my head sculpt (I essentially just used it for its ball joint), 3 pairs of Spider Man thwipp hands (finally found a use for them!) for the small hands and a pair of hands from the Odin BAF for the big hands. The kneepads came from a Ninja Turtle figure and the spikes are toothpicks with too many coats of glue to count.

My favourite part of the figure has to be the swappable faceplates. I decided to try something I have never done before: to utilize magnets to allow for swappable faceplates. Each faceplate fits to the face perfectly and attaches via magnets. They swap out with very little effort, yet are secure enough to not have to worry about them falling off when handling. There are 3 different expressions: gritting teeth/mean face, smiling/happy face and cool guy with a toothpick face.

Aside from the faces, I also gave him 4 sets of hands (fists, thumbs up, hang ten’s, and jumbo fists) and a giant left boot that swaps out with the left foot. Unfortunately, my execution was not well thought out, and ultimately, it ended up being pretty useless. I didn’t consider the weight of the boot or the strength that would be required to keep the boot in the air, therefore his leg (and knee) don’t really support the weight. I was able to keep them in place (as seen in pics) using a flight stands. But it’s the thought that counts, right? :)

This figure was SCULPT HEAVY! He is essentially 90% resculpted (only the ribcage and part of the crotch piece was left intact.) I had to resculpt all the muscles on the legs and the arms. I had to build up the chest, abs and shoulders as well. I obviously sculpted the feet, hands, head and faceplates. Oh and that giant boot was made from a heavily modified Juggernaut boot.

The head and faces went through many different looks (as you can see from the WIP pics on my webpage). It took multiple attempts (and loads of feedback from my friends) before I was happy with the final results.

When it came to painting, I got to try some new techniques with my airbrush, which are barely noticeable in the pictures, but I think look pretty great in person. I used my coloured primers for both the green and the yellow parts to ensure they really popped on the finished product. I ALMOST added black spots like some of the promo material for the original video game showed, but I feared he might look like a green cow, so I opted to not take my chances and ruin my sweet green shades.

Overall, I am super stoked on how Rash turned out. I think the alt hands and swappable faces allow for so many posing options that it was hard to not take a million pics of him. Although challenging, it was a lot of fun to see him come together. He was my primary work in progress custom for over 6 weeks so it was a long journey to get to the final stretch. I hope my recipient enjoys him as much as I enjoyed making him. And thank you all for stopping by to check out my secret santa reveal!

If you aren’t following along, I suggest heading over to the Fwoosh Forum to check out the Secret Santa thread to see the reveals as they roll in. No membership needed to view. It’s definitely a fun little event, especially now that the reveals have started rolling in. There are over 40 participants this year so the reveals should be plentiful. Cheers!

Pictures
User Comments
avatar
DSNG500 -
Saturday, September 26, 2020
Cool Custom man!!
avatar
80skungfu -
Saturday, June 22, 2019
I do a lot of sanding but it never gets that smooth, looks like an official factory job! Can I ask what sculpting material you use? I went through the thread at thefwoosh you were talking about, holy crap so many phenomenal customs in there, it looks like so much fun, but I feel bad you don't still have your Battldtoad!
avatar
Customs by Matchu -
Saturday, June 22, 2019
Ya it would have been cool oto keep Him after all the love that went into him. I use apoxie sculpt to do the majority of my sculpting. You should consider joining in kn the swap this year. Signups are soon!!
avatar
80skungfu -
Saturday, June 22, 2019
Looking up battletoads customs since I'm working on one. Yours came out amazing. I'm having to sculpt a lot too, your sculpt work is so nice and smooth what's your secret? Love the boot and really cool idea with the swappable face plates!
avatar
Customs by Matchu -
Saturday, June 22, 2019
Thanks man. Full body sculpt and lots of sanding is what made it so smooth. Haha took a while but it was totally worth it cause I was very happy with it by the end
avatar
Rudo13 -
Thursday, December 27, 2018
This looks like it could be store bought! Awesome details!
avatar
revoltechone -
Monday, December 24, 2018
Great work!

-revoltech1
avatar
Dravenheart -
Sunday, December 23, 2018
Insane! Love all the alternate parts. Battletoads are super tricky to pull off, but this came out great!
avatar
Skullface -
Sunday, December 23, 2018
GREAT!
avatar
TheRubicon -
Saturday, December 22, 2018
I love it! I haven't thought of these characters in years. That's why I love this, brings back all the nostalgia!
avatar
Floydscruffy -
Friday, December 21, 2018
Love to see one of these guys made. Great job.
avatar
newcollector -
Thursday, December 20, 2018
Reading all of these comments here, FB and IG, I feel like I might be the only one who never played the game. Anyway, great job on this one!
avatar
Jarred706 -
Thursday, December 20, 2018
Very cool. The game beat me more often than not...
avatar
VicVeinz -
Thursday, December 20, 2018
One of the best games that came out late in the nes lifespan. Too bad many gave up on it and rage quit when they couldn't get passed the turbo tunnel stage!😂 awesome job my friend!!👍👏👏
Write a new Comment
New Comment...
biggrin  smile  sad  surprised  confused  cool  badgrin  mad  razz  redface  cry  evil  rolleyes  wink  eusa_angel  eusa_boohoo  eusa_clap  eusa_dance  eusa_doh  eusa_drool  eusa_eh  eusa_hand  eusa_liar  eusa_naughty  eusa_pray  eusa_shhh  eusa_shifty  eusa_sick  eusa_silenced  eusa_snooty  eusa_think  eusa_wall  eusa_whistle  

 
Marvel Legends Custom on eBay
Previous / Next Customs
Ma'iiganSubmission OrderNewtralizer
Puff AdderMarvel Legends SeriesCustom War Blade
Finn (Star Wars: The Last Jedi)Created by Customs by MatchuPeter Parker, Tony Stark and Han Solo alt heads
Disclaimer
The figures contained in the Custom Showcase are not for sale by Figure Realm, and the creators of the customs are no way affiliated with Figure Realm. The Custom Showcase is purely for entertainment purposes and only provides a means for the creators to show off their work and trade ideas. Figure Realm does not make or sell customs.

If this custom violates the Custom Showcase Guidelines, please Report it.